Christie Roadster HD14K-J User Manual Download Page 138

Page: 138 / 182

5-10

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01 Rev. 1 (10-2011)

Section 5: Maintenance

IGURE

5-12

5.5

Power Cord and Attachments

Use only the AC power cord supplied. Do not attempt operation if the AC supply and

cord are not within the specified voltage and power range. Refer to Section

7 Specifica-

tions

• Only use attachments or accessories recommended by Christie, such as the specific power cord supplied. Use

of other attachments or accessories with this projector may result in the risk of fire, shock or personal injury.

• Do not allow anything to rest on the power cord. Locate the projector where persons walking on it or objects

rolling over it cannot abuse the cord.

• Operate the projector at the specific voltage only. Do not overload power outlets and extension cords as this

can result in fire or shock hazards.

• The projector is equipped with a 3-wire plug having a third (grounding) pin. This is a safety feature. If you

are unable to insert the plug into the outlet, contact and electrician to have the outlet replaced. Do not defeat
the safety purpose of the grounding type plug.

LEFT

RIGHT

Summary of Contents for Roadster HD14K-J























































































































































































Search results

Summary of Contents for Roadster HD14K-J

Reviews:

Christie Roadster HD14K-J, User Manual, Page: 138 / 182

Search results

Summary of Contents for Roadster HD14K-J

Reviews: