•
Pull-out/prop-open mechanism provides quick service access.
•
Integrated cable management tie-backs make display-to-display cabling simple.
•
Included security hardware prevents the mount from extending out from the wall.
•
Adjustable VESA
®
mounting hole patterns in 100 mm (3.9”) increments, starting at 200 x 200
mm (7.9” x 7.9”) up to 700 x 400 mm (27.5” x 15.7”) for ML10 LCD mounts. Additional
patterns supported with adapter plates.
•
Adjustable VESA
®
mounting hole patterns in 100 mm (3.9”) increments, starting at 200 x 200
mm (7.9” x 7.9”) up to 600 x 400 mm (23.6” x 15.7”) for MP10 LCD mounts. Additional
patterns supported with adapter plates.
Safety warnings and cautions
To prevent personal injury and to protect the device from damage, read and follow these safety
precautions.
Warning! Failure to comply with the following could result in death or serious injury.
•
The supporting structure must safely support the combined load of the product, all attached
hardware, and components following all local safety standards and regulations.
•
A minimum of two people or lift equipment is required to safely lift, install, or move the product.
•
Always handle the screen from its sides. Do not touch the inside of the screen.
•
Christie products must be installed and serviced by Christie qualified technicians.
Caution! Failure to comply with the following could result in minor or moderate injury.
•
Do not over-tighten hardware.
•
This product is intended for indoor use only.
Types of installations
Learn the supported surfaces for installing the wall mounts.
Wall construction
Hardware required
Wood Stud
Included
Wood Beam
Included
Solid Concrete
Not Included
Cinder Block
Not Included
Unistrut P series
Not Included
Metal Stud
Contact Qualified Professional
Brick
Contact Qualified Professional
Other
Contact Qualified Professional
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
2
020-101712-03 Rev. 1 (07-2015)
