B
Adapter Bracket (Qty. 2)
I
M8 x 16 mm socket pin screw (Qty. 4)
C
#14 x 2.5” hex head wood screw (Qty. 5)
J
4mm Allen wrench (Qty. 1)
E
Fender washer (Qty. 4)
-
Mesh sleeve (not shown) (Qty. 1)
F
Nylon shoulder washer (Qty. 4)
-
Cable tie (not shown) (Qty. 2)
G
M5 x 10 mm socket pin type-F screw (Qty. 2)
Required tools
Ensure the appropriate tools are available during the installation.
•
Stud finder (edge-to-edge stud finder is recommended)
•
Phillips
®
screwdriver
•
Socket wrench
•
Pencil
•
Drill
•
3/8" socket
•
5/16” (8 mm) bit for concrete and cinder block walls
•
5/32” (4 mm) bit for wood stud walls
•
Level
Installing the wall mount
Learn how to install the wall mounts onto different surfaces.
The maximum load capacity of the wall mount is 125 lbs (57 kg). Illustrations are graphical
representations only and are provided to enhance the understanding of the written material.
When installing the wall mounts, ensure there is proper spacing between the mounts to accommodate
the panels. Always start with the bottom left display in the array.
1. Measure the width and height of the display panel.
2. Locate the center of the bottom left display.
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
4
020-101712-03 Rev. 1 (07-2015)
