10. Check that the mount is level. If necessary fine adjust the vertical position.
11. Adjust the vertical position of the panel to leave a minimum 1 mm (0.04”) gap between
panels so the weight of the panels do not rest on the panels underneath.
Always adjust the X position of the panels individually, rather than pushing an entire row left
to right. For example, if you are constructing a 3x3 video wall push the panels individually
from the right and left sides, towards the center of the wall.
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
12
020-101712-03 Rev. 1 (07-2015)
