5. To identify where the mount for the second row of displays should be installed, measure the
height of the display panel from the top of the bottom left display to the top of the first
display in the second row (Y).
Installing the mount to wall studs, plywood, drywall over wall
studs
Learn how to install the wall mounts onto wall studs, plywood, or drywall.
Hardware provided is for attaching the mount through standard thickness drywall or plaster into wood
studs. Installers are responsible for providing the hardware for other types of mounting situations.
When installing the wall mounts on a wood stud wall covered with plywood, verify that the wood studs
are a minimum of 2" x 4" nominal size and plywood is a minimum 1/2" (13 mm) thickness. Plywood
may be covered by drywall up to 5/8" thick.
1. Use an “edge-to-edge” stud finder to locate the edges of the stud.
2. Based on their edges, draw a vertical line down the stud center.
3. Place the pull out mount assembly on the wall to use as a template, and verify the pull out
mount is level on the center line of the stud.
4. Mark the center of the four mounting holes.
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
6
020-101712-03 Rev. 1 (07-2015)
