Attaching the panel to the wall mount
Install the panel with the brackets onto the wall mount.
1. Slide the adapter brackets into position.
2. Loosely fasten the panel in place using the security screw.
Landscape orientation
Portrait orientation
3. Adjust the panel until it is ±2”/50.8 mm from the center.
4. To lock the panel in place, use a 4mm Allen wrench to tighten the security screws.
Adjusting the pull out mount assembly
Align the pull out mount.
Use the knob to make fine-tuned adjustments to the pull out mount alignment.
•
Turn the knob clockwise to raise a side.
•
Turn the knob counter-clockwise to lower a side.
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
14
020-101712-03 Rev. 1 (07-2015)
