Installing the mount to the F100 frame
Learn how to install the wall mounts onto the F100 frame.
1. Make sure all components within the video wall are level, starting with the P100 Pedestal. If
the floor surface is not level adjust the feet on the pedestal.
For information on installing the P100 pedestal and the F100 frame, see P100 Pedestal and
F100 Frame for FHD552-X Installation Manual (020-101714-xx).
2. Install the F100 Frame onto the pedestal.
If the F100 Frame is used as stand alone unit it must be leveled before securing the wall
mount.
3. Before installing the wall mount use a standard level to check alignment on the horizontal and
vertical edge of the frame.
4. Position the wall mount within the center of the frame, aligning it with the mounting holes.
5. Tighten the wall mount to the F100 Frame using the four M6 screws.
Never tighten in excess of 80 in- lbs (9Nm).
Installing 46-55" flat panel screens on the ML10/MP10 wall mount
Installing Flat Panels on the ML10/MP10 Wall Mount Instruction Sheet
9
020-101712-03 Rev. 1 (07-2015)
