Christie LW41, User Manual

Page: 7 / 560

5
Introduction
LX41/LW41 User Manual - Instant Stack Guide 020-000509-01 Rev.1 (06-2012)
General installation
NOTICE
► Position the projector to prevent light from directly hitting the
projector’s remote sensor.
• Do not place the product in a place where radio interference may be caused.
CAUTION ► Place the projector in a cool place with sufficient ventilation.
• Keep a space of 30 cm or more between a side of the projector and other
objects such as a wall. If you install two project ors in Style 2 (

6
), keep a
space of 30 cm or more between the two projectors.
• Do not stop up, block nor cover the projector’s vent holes.
• Do not place the projector at places that are exposed to magnetic fields, doing
so can cause the cooling fans inside the projector to malfunction.
► Avoid placing the projector in smoky, humid or dusty place.
• Do not place the projector near humidifiers. Especially for an ultrasonic
humidifier, chlorine and minerals contained in tap water are atomized and
could be deposited in the projector causing image degradation or other
problems.
WARNING
► Install the projector where you can access the power outlet
easily.
► Do not subject the projector to unstable conditions. Install the projector in a
stable horizontal position.
• Do not use any mounting accessories except the accessories specified by the
manufacturer. Read and keep the manuals of the accessories used.
• For special installation such as ceiling mounting, be sure to consult your
dealer beforehand. Specific mounting accessories and services may be
required.
► Do not install the projector near thermally conductive or flammable things.
► Do not place the projector where any oils, such as cooking or machine oil,
are used.
► Do not place the projector in a place where it may get wet.