Christie LW41, User Manual

Page: 14 / 560

12
Installation
LX41/LW41 User Manual - Instant Stack Guide 020-000509-01 Rev.1 (06-2012)
3.
Adjust the image size and position of Set B with the ZOOM ring, VERTICAL
adjuster, HORIZONTAL adjuster and FOCUS ring such that the image can be
superimposed well to the image of Set A .
NOTE
• Fine adjustment of the image size and position thereafter with
functions suc h as KEYSTONE and PERFECT FIT does not increase the
image size. It is therefore important to have the image of Set
B
completely
overlapping the image of Set
A
.
• When controlling Set B with the remote control, Set A may also respond to the
remote control. It is recommended to control Set B with the control panel on Set B .
• When two projectors are arranged side by side, adjust the image of Set B to
superimpose well to the image of Set A .
• If you are using Simple Stack , it is recommended to disable the remote
control receiving on Set B using KEY LOCK and operate using the control
panel or a wired remote control as Set A will r espond to the remote control.
(

Operating Guide
→
OPTION menu )
•
If you are usin g Simple Stack, go to
For Simple Stack users
. (

16 )
NOTE
• KEYSTONE cannot be operated when PERFECT FIT is in use. To
reset both functions, reset PERFECT FIT first.
• Perform the MIRROR setting first if necessary as it may
change the image
position. (

Operating Guide
→
SETUP menu )
2.
Reset th e adjustment of KEYSTONE and PERFECT FIT on Set B .
(

Operating Guide → EASY MENU or SETUP menu )
1.
T urn on Set B .
NOTE
• After turning on Set B , make sure the image of Set B is not
significantly tilted compared to the image of Set A . If the image is overly
tilted, rotate the elevator feet of Set B to adjust the angle such that the tilt is
just about right. Check again that there is a gap of about 1 mm between the
protrusion at the bottom of Set B and the top of Set A .
Setting up Set
B
4.
Display the menu with the MENU button . (

Operating Guide → Using the
menu function )
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will app ear on screen.
(

Operating Guide → OPTION menu )
(continued on next page)