Christie LW41, User Manual

Page: 37 / 560

35
Restrictions on Schedule function
LX41/LW41 User Manual - Instant Stack Guide 020-000509-01 Rev.1 (06-2012)
NOTE
• If the Schedule is not executed, an error message will be sent in
accordance with the conditions set in Schedule Execution Error on Web
Control. (

Network Guide → 3. Web Control → 3.6 Alert Settings )
• If the Schedule function is set to turn off the power when the projectors are
operat ing in Intellectual Stack, both the Main and Sub projectors will be turned
off.
• If the Schedule function on the Main projector is set to turn on the power, the
projectors will be turned on according to the LAMP MODE setting.
• When the two projectors are operating in the DUAL mode and a menu is being
displayed on one of the projectors, the Schedule function for My Image and
Messenger on the other projector will not be executed.
• Power Off in the table refers to turning off the power and entering into standby
mode according to the Intellectual Stack settings or by pressing the STANDBY/
ON button on the remote control or control panel of the Main projector.
• The projectors cannot be turned on by the Schedule function on the Sub
projector. Set it on the Main projector if necessary.
• When the Sub projector is turned off according to the ALTERNATE MODE
setting, the Schedule function on the Sub p rojector to turn off its power will be
executed without error.
6. Restrictions on Schedule function (continued)
th e Schedule function can be used in Intellectual Stack, the Schedule will be
executed. If not, it will not be executed.
X *2): This Schedule can be input to Web Control when the projectors are
operating in Intellectual Stack but it will not be executed.
X *3): This Schedule can neither be input to Web Control nor be executed when
the projectors are operating in Intellectual Stack.