Christie J Series, Setup Manual

Page: 15 / 60

Section 2: Installation and Setup
J Series 2.0, 2.4, and 3.0 kW Setup Guide 2-5
020-100751-01 Rev. 1 (10-2011)
For 3000W Model
1. Remove the locking pin from the bracket surrounding the AC receptacle at the AC inlet of the projector by
pressing down on the button on the end of the locking pin, and then pull upwards on the pin to remove it,
as shown in
Figure 2-6 .
F
IGURE
2-6
2. Open the cap on the AC plug and line up the slot on the plug with the pin on the receptacle. See Figure 2-7 .
F
IGURE
2-7