Christie J Series, Setup Manual

Page: 33 / 60

Section 3: Operation
J Series 2.0, 2.4, and 3.0 kW Setup Guide 3-11
020-100751-01 Rev. 1 (10-2011)
Navigate Within the Edit Window: Press
R
IGHT
A
RROW
K
EY
to move the cursor forward or
L
EFT
A
RROW
K
EY
to move the cursor backwards as desired.
Edit a character: To edit a highlighted character, use
U
P
A
RROW
K
EY
and
D
OWN
A
RROW
K
EY
to scroll
through the alphabet, numbers, spaces and punctuation available. When the character you need appears, press
R
IGHT
A
RROW
K
EY
to select it—the cursor will move to the next available character of current text. To convert
a lower case letter into a capital letter, position the cursor on the letter and press
F
UNC
followed by the
U
P
A
RROW
K
EY
. To convert a capital letter into a lower case letter, position the cursor on the letter and press
F
UNC
followed by the
D
OWN
A
RROW
K
EY
. NOTE: Also enter numbers directly from the keypad.
To convert a lower case capital letter, position on the letter and press
F
UNC
followed by the
U
P
A
RROW
K
EY
, To
convert a capital letter into a lower case letter, position on the letter and press
F
UNC
followed by the
D
OWN
A
RROW
K
EY
.
Add or Delete a Character or Space:
To insert a space at the cursor location, press
F
UNC
then the
R
IGHT
A
RROW
K
EY
. To delete a highlighted character (or space), press
F
UNC
then the
L
EFT
A
RROW
K
EY
.
Delete all Characters:
Press
F
UNC
followed by
E
NTER
.
Press Enter When Finished: To accept edits and leave the edit window, press
E
NTER
.
NOTE : Press
E
XIT
at any time to cancel changes and return to the previously defined text.
Edit numerical values:
Enter numbers directly from the keypad to specify numbers representing projectors channels (source setups),
or slots.
As each digit is entered, it is inserted on the right of the field, and the numbers already in the field are
shifted on the left. The channel numbers are defined with two digits—for example, if you enter only a single
digit (such as “7”) for a channel number, the channel will automatically be defined as “07”.
Enter “07” to utilize this channel. If you press any non-numbered key, the number entered up to that point is
accepted and updated as the new value. Press
E
XIT
to cancel editing of numerical values.