Christie J Series Setup Manual Download Page 55

Page: 55 / 60

Section 6: Specifications

J Series 2.0, 2.4, and 3.0 kW Setup Guide

7-5

020-100751-01 Rev. 1 (10-2011)

7.6.3 Marking

This product shall conform to all relevant Canadian, US, and European directives, standards, safety, health and
environmental concerns and bears the following markings at product launch:

• UL

• CE

• RoHS

• WEEE

• Future International Certifications to include: CCC, KC, PSE, c-tick, Gost-R, South Africa

• International packaging recycling mark requirements:

• EU Directive (94/62/EC) on packaging and packaging waste;

• China packaging recycling mark standard (GB18455-2001);

• Korea extended producer responsibility (EPR) separate discharge mark system under the act on the promo-

tion of resource saving and recycling (2003);

• United States society of the plastics industry (SPI) resin identification code (1988);

• ISO standards on marking of plastics (11469:2000, 1043-1:2001, 1043-2:2000, 1043-3:1996, and 1043-

4:1998).

Summary of Contents for J Series





























































Search results

Summary of Contents for J Series

Reviews:

Related manuals for J Series

Brands by name

Popular brands

Christie J Series, Setup Manual

Search results

Summary of Contents for J Series

Reviews:

Related manuals for J Series

Brands by name

Popular brands