Christie IMB, User Manual

Page: 39 / 122

Manage Storage Devices
Christie Integrated Media Block User Manual 27
020-100845-05 Rev. 1 (08-2013)
3. Tap a NAS device in the NAS list.
4. Tap Test Performance.
5. Tap Change and select the test content.
6. Tap Start Test.
7. Tap Close.
8. Tap Cancel.
Refresh NAS Share Names
1. Tap Menu > Christie IMB > System.
2. Tap Storage.
3. Tap a NAS device in the NAS list.
4. Tap Refresh Share Names.
5. Tap OK.
6. Tap Save.
7. Tap OK.
Verify NAS and DAS Performance
To verify the performance of your NAS or DAS device, complete these tests:
• Ingest content. See Ingest Content on page 48.
• Verify content plays without interruption. See Play Content on page 12.
• Remove a hard drive from the NAS or DAS device and verify that playback is not interrupted.
• Test NAS performance. See Test NAS Performance on page 26. The minimum data transfer rate
for the NAS device should be 500 Mbps. However, data transfer rates of 700 to 800 Mbps are
preferred. A KDM key is not required to test NAS performance.
• Measure NAS performance with a third-party application such as the Intel NAS Performance
Toolkit (http://software.intel.com/en-us/articles/intel-nas-performance-toolkit/).
Delete a NAS
1. Tap Menu > Christie IMB > System.
2. Tap Storage.
3. Tap a NAS device in the NAS list.
4. Tap Delete.
5. Tap Yes.