Christie IMB, User Manual

Page: 33 / 122

Manage Storage Devices
Christie Integrated Media Block User Manual 21
020-100845-05 Rev. 1 (08-2013)
5. Enable security:
a. Click Common in the left pane of the Iomega management screen.
b. Click Users in the right pane.
c. Click Enable security.
d. Enter admin in the Username field.
e. Enter admin in the Password field.
f. Enter admin in the Confirm password field.
g. Click Apply.
6. In the left pane click Network.
7. Click Network in the right pane.
8. Click Modify network settings.
9. Clear the Automatically configure DNS, WINS, and all IP addresses (DHCP) check box.
10. In the first DNS Servers field, enter 127.0.0.1.
11. In the second DNS Servers field, remove the information.
12. In the Bonding Mode list, select Adaptive Load Balance.
13. Click Apply.
14. Click Yes.
Add the Iomega NAS to the Christie IMB Network
1. Click Network in the left pane of the Iomega management screen.
2. Click Network in the right pane.
3. Expand the second network interface.
4. Expand Information.
5. Enter an IP address that allows the NAS device to communicate with the Christie IMB NAS1 port
in the IP Address field. For example, 192.168.1.100. To configure the settings of the NAS1 port,
see
Configure the Christie IMB Communication Settings on page 23.
6. Enter 255.255.255.0 in the in the Subnet Mask field.
7. If required, enter the gateway address for the NAS device in the in the Gateway field
8. In the Jumbo Frame list, click None.
9. Click Apply.
10. Repeat step 3 of Configure the Iomega NAS Network Settings on page 20 when the new
communication settings are applied.
You need to repeat step 3 to reconfigure the communication settings of the computer to use the
new IP address. Specify a non-conflicting address. For example, if the IP address in step 5 is
192.168.1.100, you could enter 192.168.1.102.