Christie IMB, User Manual

Page: 35 / 122

Manage Storage Devices
Christie Integrated Media Block User Manual 23
020-100845-05 Rev. 1 (08-2013)
Create a Network Share Folder
A share folder is required to allow the Christie IMB to store ingested content.
1. Click Storage in the left pane of the Iomega management screen.
2. Click Shares in the right pane.
3. Click Add a Share.
4. Enter Content in the Name field.
5. Click Create.
6. Expand Access Permissions.
7. Select Read/Write for the Everyone entry.
8. Click Apply.
Enable NFS on the Iomega NAS
1. In the left pane on the Iomega management screen, scroll down and then click All Features.
2. Click Protocols in the right pane.
3. Move the Off/On slider for NFS to On.
4. Click the Settings ( ) icon to the right of NFS.
5. Select Allow all client users full access.
6. Click Apply.
Configure the Christie IMB Communication Settings
You can use the projector touch panel controller (TPC) menus or the web interface to set the
communication settings between the Christie IMB and the Iomega device. If you use the web
interface, the IP address of your computer must be on the same subnet as the projector and the
computer must be connected by an Ethernet cable to the Ethernet port of the PIB.
1. Disconnect the Ethernet cable from the computer and connect it to the NAS1 port on the Christie
IMB.
2. On the projector TPC, tap Menu > Christie IMB > System.
3. Tap IMB Network.
4. In the NAS 1 area, select Static IP and then complete these fields:
a. Enter an IP address that is on the same subnet as the Iomega device in the IP Address
field. For example, if the IP address of the Iomega device is 192.168.1.100, you would
enter 192.168.1.101.
b. Enter 255.255.255.0 in the Netmask field.
Unless it is required for your installation, leave the Gateway field blank.