Christie IMB, User Manual

Page: 24 / 122

12 Christie Integrated Media Block User Manual
020-100845-05 Rev. 1 (08-2013)
Hardware Installation and Setup
1. Tap Menu > Christie IMB > System.
2. Tap General > Config Files.
3. Tap Load Config File in the RealD 3D EQ area.
4. Insert a USB flash drive with the RealD 3D EQ configuration file into the USB port on the side of
the touch panel controller (TPC).
5. Select the configuration file.
6. Tap Accept.
Load a Dolby Color Correction File
You need to install the Dolby Color Correction File if you are using Dolby technology to display 3D
content. If you are not using a Dolby 3D technology to display 3D content, do not complete this
procedure.
1. Tap Menu > Christie IMB > System.
2. Tap General > Config Files.
3. Tap Load Config File in the Dolby Color Correction area.
4. Insert a USB flash drive with the Dolby Color Correction file in the USB port on the side of the
touch panel controller (TPC).
5. Select the correction file.
6. Tap Accept.
Play Content
After installing and configuring the Christie IMB, these are the tasks that you typically complete to
play content:
1. Ingest the content. Content is typically provided on a hard drive sent by your movie distributor.
To ingest content, see Ingest Content and the KDM Key on page 35.
2. Ingest the Key Delivery Message (KDM) key. A KDM key is not required for trailers and other
unencrypted content. The KDM key is typically sent separately from the encrypted content on a
USB flash drive. See
Ingest Content and the KDM Key on page 35.
3. Verify the content plays correctly and the KDM is correct. See Content Window Icons on page
30.
4. Create a play list. A play list is a list of content files including trailers, features, and automated
events that play in an order that you define. See Play Lists on page 69.
5. Verify the play list plays correctly. See Content Management on page 29.
6. Optionally schedule playback or add automation to a play list:
• To learn more about scheduled playback, see Schedule Views on page 77.
• To add automation, see Manage Automation on page 37.