Parameter
Requirement
Rated current
0.23 A maximum
Maximum power draw
45 W
Tools and components required
The following tools are required to install CounterAct.
Tools required
•
Phillips screwdriver
•
Magnetic screwdriver (provided with the product)
•
2.5 hex key
•
T20 Torx tamper-proof screwdriver
•
Drill
•
Hammer
•
Level
•
Tape measure
•
Ceiling and ceiling tile cutter
•
Pencil
•
UIT240 light meter for 222NM
Components required
•
Load wires
•
Self-drilling screws ST4.2X25 (ISO 15481-1999)
•
12.7 mm (1/2 inch) flexible metal conduit and fitting or cable gland
Safe access to the ceiling is required.
Optional accessories
The following accessories are available for the CounterAct:
•
Receiver box with IEC plug—black (P/N: 174-102104-XX)
The IEC receiver box assists with setup prior to installing the unit in the ceiling, bench top testings,
and troubleshooting.
Use only the attachments and/or accessories recommended by Christie. Use of others may result in
the risk of fire, shock, excessive UV exposure, or personal injury.
Installation and setup
CounterAct Installation and Setup Guide
15
020-103456-02 Rev. 1 (12-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CA20-AC
Page 1: ...Installation and Setup Guide 020 103456 02 CounterAct ...
Page 52: ......
