ID
Component
Description
• Switches to Standby mode from current operational mode if
pressed less than 5 seconds.
• Turns on the LED status indicator (blinking green three times)
if pressed for more than 5 seconds and less than 10 seconds.
This functionality is the same as the Identify device function,
even though the fixture is in Stealth mode.
• Performs a factory reset and pairing if pressed for longer than
10 seconds within five minutes after start up.
H
Three-finger hold holes
Provides hand holds to mount the disinfecting module to the
receiver box.
Inserting the disinfecting module in the receiver box
Insert the disinfecting module in the receiver box and lock the fixture in position.
1. Place the disinfecting module in the receiver box by aligning the slots on the side of the
receiver box and the disinfecting module.
2. Hold the disinfecting module and turn the disinfecting module clockwise to engage.
A
Lock
B
Align line
C
Start line
D
Lock line
E
Unlock
Installation and setup
CounterAct Installation and Setup Guide
17
020-103456-02 Rev. 1 (12-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CA20-AC
Page 1: ...Installation and Setup Guide 020 103456 02 CounterAct ...
Page 52: ......
