3. Remove the tile where you plan to install the receiver box and cut a round hole for the junction
box.
4. Install the ceiling tile you cut the hole in from step 3.
5. Install the junction box flush with ceiling panel.
A
Ceiling panel
B
Junction box
C
Hanger
6. Using two screws, mount the crossbar and cover plate on the junction box.
7. Adjust the orientation in range of 90° as required.
8. Remove the metal casing from the receiver box before installing it (on page 26).
9. Lift up the receiver box close to the crossbar and position it with the center hole.
Installation and setup
CounterAct Installation and Setup Guide
29
020-103456-02 Rev. 1 (12-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CA20-AC
Page 1: ...Installation and Setup Guide 020 103456 02 CounterAct ...
Page 52: ......
