background image

8/44 

EN

 

Kinetec Kinevia™ / Kinetec Kinevia Duo™ 

Before each training session: 

◦ Check that the device is not damaged.

◦ Please make sure that the power supply block and the electric cables are in good condition. Only use the original

power cord delivered with the device.

◦ Check that the power outlet is in good condition and is suitable to connect the device power cord plug.

◦ Check that the cords are always free around the device to avoid damaging them.

◦ Always  make  sure  it  is  not  possible  for  the  arms  to  become  caught  up  in  moving  parts  such  as  leg  fixings,  arm

handles or protective plates during use.

◦ Make sure that the foot pedals (5) and the arm trainer grips (9) rotate freely during training.

◦ Make sure that the indexing button (3) for height adjustments is firmly anchored in one of the holes and tightened.

◦ Make sure that the two indexing buttons (14) used to adjust pedal distances are firmly anchored in one of the holes

and tightened.

◦ The doctor or therapist defines the training protocol and duration and makes sure it is properly carried out (settings,

session duration and frequency of use).

◦ Always check the displayed movement parameters before starting the device.

◦ Make sure that the posture, the device height setting, the pedalling radius, the distance to the pedals and all training

parameters are set to match your physical capacities.

◦ Make sure that the legs or arms are properly fixed before starting the therapy.

During the training session: 

◦ Do not touch the static or moving parts of the device when it is in use. There is a risk of pinching or crushing by the

arm trainer grips or foot pedals.

◦ Keep children and pets away from the device. There is a risk of pinching or crushing by the arm trainer grips or foot

pedals.

◦ Children under the age of 15 should only train using the Kinevia under permanent supervision.

◦ Only use the leg trainer wearing suitable footwear and check that shoe laces will not get caught up in moving parts.

Risk of injury by laces being caught up.

◦ Only use the leg trainer with both foot fixings attached and tightened.

◦ Always  make  sure  the  arms  are  securely  attached  to  the  arm  attachments  and  that  there  is  a  good  grip  on  the

handles when using the arm trainer.

◦ The device must only be used on healthy and unbroken skin.

◦ When using the arm trainer, your feet must not be attached to the foot pedals (5).

◦ Make sure there is a correct distance between your seated position and the device position. Avoid stretching your

articulations too much (see section 7.1 on page 19)

◦ We recommend starting training slowly and avoiding overloads.

◦ Not smoking is recommended during training.

Summary of Contents for Kinetec Kinevia

















































Reviews: