30/44
EN
Kinetec Kinevia™ / Kinetec Kinevia Duo™
Standard [assisted active]:
this program is used for training with a braking resistance that you can adapt to your
personal needs. Standard training (medium training level) can also be called using the quick start key on the home
page.
Symmetrical training [active]:
this programme helps correct movement symmetry by displaying the force you exert
on the left and right sides of your body. Deficiencies can be corrected in this way.
The horizontal lines and the values indicate the levels
you use your left and right halves respectively. The total
of the values will always be 100%.
The objective is for the two horizontal lines to be at the
same level forming an unbroken line.
The values can be false if different pedal radiuses are set on each side or if you are not seated in a central
position on your chair or in your wheelchair.
Endurance [active]
:
depending on the training level, this program uses a target Watt value given for active training.
The motor resistance automatically adapts to the rotation speed in order to maintain your power (measured in Watts)
constant. You can adapt the Watt set poin
t during training by pressing the “Watt” key.
Cardio [assisted active]:
(only available with the Kinevia cardio kit, reference 4665009469) this uses a target heart
rate. The motor resistance is automatically reduced once the heart rate has been reached. You can adapt the target
heart rate by pressing the “heart rate” key.
DANGER
DANGER OF DEATH DUE TO A TOO HIGH
HEART RATE SETTING
The target heart rate must be adapted to every patient depending on their
maximum heart rate
It is essential that you define your training with your doctor or therapist
and adapt the target heart rate to your personal needs.
Multiple sclerosis [assisted active]:
this program provides training against a braking resistance that depends on the
selected training level. Assisted training is enabled during the active training to support you during your movement.
Parkinson's disease [assisted active]:
this program provides training against a braking resistance that depends on
the selected training level. Assisted training is enabled during the active training to support you during your movement.
Rotation speed and motor resistance are set to higher val
ues than the “multiple sclerosis” program because, from
experience, a higher pedalling radius is required for this pathology.
Post-OP [assisted active]:
in this program, assisted training is enabled during active training to support you during
your movement..
Stroke [assisted active]:
in this program, assisted training is enabled during the active training to support you during
your movement.
You can change the default values for each program using the “Settings” menu (see section 12.2 on page 35).
