
INST.No.INE-559-P1
-C3-
Warnings and Cautions
◆
To use this product, make sure to observe following matters and use it correctly.
In addition, keep this instruction manual carefully in the place that you can reach at any time.
Shows an act of the prohibition.
Warning
(May cause death or serious injury)
Don’t operate this thermometer in places where combustible or volatile gas is existed.
It is extremely dangerous to use the thermometer in such environment.
When connecting power to the power terminals, make sure to turn OFF power supply to
prevent an electric shock.
Don’t use the thermometer if it is broken, smoking or abnormal order is detected.
These may cause fire. For such abnormal conditions, turn off the power supply
immediately and contact your sales agent of CHINO Corporation.
Disassembling or modifying this thermometer may not only cause failure but also be
dangerous to you. Disassembling or modifying this thermometer is prohibited.
Caution
(May cause injury or physical damage)
Avoid using in the places where; temperature changes widely, humidity is high, close to
heavy electric circuit exist, inductive interference is large, static electricity exists or
magnetic field, and mechanical vibration and impact exist. Also avoid using under the
atmosphere where dust and particles exist, corrosive gas exists and electric noise or static
electricity exists and easily to interrupt.
Do not wire the connection cable near a noise source; relay drive line and power line.
Do not bundle the connection cable with the line that noise is overwrapping, and do not
store it into the same duct.
To use the thermometer safely, strictly observe the contents described in this instruction
manual.
If the contents of this instruction manual are not complied, damage to the thermometer,
functional decline or damage to a system may occur.
!
!
!
!
!
!
!
!
!
!
Summary of Contents for IR-BZ Series
Page 2: ......
Page 11: ...INST No INE 559 P1 5 4 3 Measuring Diameter and Measuring Distance Unit mm φ16 φ8 400 200 ...
Page 43: ......