Chino IR-BZ Series, Instructions Manual, Page: 13 / 44

INST.No.INE-559-P1
-7-
5.2 Connections to input and output terminals
5.2.1 Terminal arrangement and terminal nameplate
Connecting cable IR-ZBP
(Color) (Marker)
FG
Grounding Gray FG
8-36VDC
Power supply
Red 8-36VDC
0VDC
White/Red 0VDC
SA
Communication
Black SA
SB
White/Black SB
DI
Contact input Yellow DI
DO
Contact output White/Yellow DO
COM
Common White/Brown COM
A GND
Analog ground White/Green A GND
OUT-A mA
Analog output
Green OUT-A/TC
OUT-TC
Thermocouple
output
OUT-HT
Detector
temperature output
Brown OUT-HT
※ Analog output and TC output can not be used at the same time. Please connect either signal to
be used
.
5.2.2 Connection of power supply terminal
5.2.3 Connection of grounding terminal
5.2.4 Connection to receiving devices
Analog output is non-isolated 0 or 4 to 20mA DC, thermocouple EMF equivalent
voltage.
Connect output terminal and receiving devices to each other.
Contact output is open collector output.
Use connecting external device rated (30V, 50mA) or lower.
Use 8 to 36VDC for power supply
Applicable power wire is 0.2 to 0.5mm
2
.
Provide a low impedance earth ground (grounding resistance 100Ω or lower)
connection.
W a rn i ng
Caution
Caution
R e m a r k s
！
When closing the lid after connection, confirm the packing is not sticking out from
the groove.
Caution
※
Make sure to turn OFF the power supply for preventing an electric shock when
connecting power terminal.