Chino IR-BZ Series, Instructions Manual, Page: 31 / 44

INST.No.INE-559-P1
-25-
9.7 Selection of contact input
Select a function to use contact input.
1) Press the SEL key couple of times from engineering mode
screen to display "din" shown on the right figure on sub
display.
2) Press
↑
key or
↓
key and change contact input types.
Selection is completed by changing.
3) It shifts to the next screen by pressing the SEL key.
･
Default setting is no (no contact input)
･
For each operation details, refer 9.4.1
Selection of hold reset type for hold
rest and 9.4 Selection of hold function
for sample hold.
[Contact input types]
no: no contact input
H.rSt: hold reset
SAMP: sample hold
[No contact input]
CONT
PEAK
AL A H
Tb MEM
Sub display Main display
[Hold reset]
CONT PEAK
AL A H
Tb MEM
CONT
PEAK
AL A H
Tb
MEM
[Sample hold]
R e m a r k s