6
Always Turn Scanner OFF
Before Disconnecting
WORKSTATION
BODY SCANNER
Laser Reflections
Laser Emissions
GENERAL SAFETY INFORMATION
Use of controls or adjustments or performance of procedures other than those specified in this Users Manual may
result in hazardous radiation exposure. See CAUTIONS on Workstation and Body Scanner. (See illustration below.)
DO NOT plug the Laser Lock system into same line as a welder. The built-in surge protector may not be sufficient to
protect against current fluctuations that result from welder use, and it may cause the computer to fail. Also, avoid metal-to metal con-
tact between all components (i.e. Workstation, Body Scanner, Welder, Vehicle Platform).
Controls
“On”/“Off” switch on Workstation — Allows power to Computer and other electrical components.
“On”/”Off” switch on Body Scanner — Allows power to Body Scanner including lasers.
Laser Safety Information
Laser Power Output: 2.5 mw @ 4.2 x 10-4 sec.
Wavelength: 650 - 670 n Meters
NOTE:
Laser Lock System is for indoor use only.
CAUTION
CAUTION
IMPORTANT
NOTE:
Properly licensed / certified electrician
needed to install the appropriate power cord plug
end on main Laser Lock power cord set.
Avoid exposure! Laser radiation is
emitted from Body Scanner apertures.
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...