![background image](http://html1.mh-extra.com/html/chief/laser-lock/laser-lock_user-manual_2600313014.webp)
14
Attachments, Clips and Extensions
A variety of Attachments, Clips and Extensions allow Targets to be mounted to practically any reference hole or bolt. These include
Magnetic Attachments, Bolt Attachments, and Reference Hole Attachments. Extensions are provided allowing Target attachment at
hard to reach locations.
Magnetic Structural Attachment
Magnetic Attachments (see Figures 10 and 11) are used on bottom of structural members when reference holes or other mounting
locations are not accessible. This attachment, used primarily for comparative measurements, should be positioned so that its vertical
surface is flush with vertical surface of structural member it mounts to. The Target can then be mounted in attachment’s clip.
The magnet on the attachment is strong and will maintain its holding power if cared for properly. A Magnet Keeper (see Inset — Figure
11) should be positioned on magnet when the attachment is not in use.
Never use arc welder or heat near Magnetic Attachment as this tends to reduce its holding power.
IMPORTANT
Figure
10
Figure
11
Bolt Attachments
Bolt attachments work equally well on the bottom of a structural component or on the side of a structural component. The nylon base
of each attachment swivels to allow for easy Target adjustments.
Magnetic Bolt Head Attachments - have a strong gripping capability and are designed to fit a wide range of bolt heads. (Figure 12 and
its inset show an example of a magnetic bolt head attachment.)
Threaded Attachments - allow operator to thread the attachment onto extruding bolt threads. (Figure 13 and its inset show an example
of a threaded attachment.)
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...