10
COMPONENT OVERVIEWS
Workstation
The Laser Lock Workstation (see Figure 2) is a steel cabinet that houses a Computer, Display Monitor, Keyboard, Printer, Power Supply
(+ 12 volt, 5 AMP), and assorted Targets, Attachments, Clips and Scales. The cabinet is supported by casters and features a drawer for
the Body Scanner when it is not in use.
Laser Lock computer system features a 250 GB hard drive, a DVD drive, 2 GB of memory, includes keyboard and mouse devices, dis-
play monitors, and a printer (see Figure 2).
Connect the Laser Lock to a 110-volt, 15 amp power source or 220-volt, 5 amp power source. (Check voltage requirements for Laser
Lock system being used.) A single purpose line is recommended. Do not use circuits subject to frequent interruptions or outages.
Avoid circuits with power surges such as from welders and some power tools. Built-in surge protector may not be sufficient to protect
against current fluctuations and it may cause the Laser Lock computer to fail. Avoid metal-to-metal contact between components (i.e.
Workstation, Body Scanner, Welder, Vehicle Platform), and move the Laser Lock components away from welding areas to avoid dam-
age from sparks.
Voltage requirements may vary in some countries.
IMPORTANT
Figure
2
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...