![background image](http://html1.mh-extra.com/html/chief/laser-lock/laser-lock_user-manual_2600313017.webp)
17
Upper Body Bar Assembly
The Upper Body Bar Assembly consists of two horizontal bars joined by a pair of Vertical Scales. (See Figure 21.) Pointers project from
Pointer Housings on Upper Bar to strut tower or other upper body reference points. Pointers are provided in ‘cone - shaped’ configura-
tions in lengths of 102mm, 178mm, and 432mm. Three Targets (Nos. 43, 44, 45) mounted to Lower Bar measure height, width (centerline),
and length of strut tower or other upper body reference points. In addition to components listed, Bolt Hole Caps and Stud Hole Caps
(ranging from 5 to 17mm in diameter) allow the assembly to be mounted to open bolt holes or studs. (See Figures 22 and 23.) The config-
uration of the cap positions the pointer at center of hole or stud.
Figure 25
Bolt Hole Cap
Stud Hole Cap
Figure
21
Figure
22
Figure
23
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...