![background image](http://html1.mh-extra.com/html/chief/laser-lock/laser-lock_user-manual_2600313013.webp)
13
NOTE: 1) Although Targets numbered 1-40 are interchangeable, be consistent when placing them at reference points.
2) With the exception of Targets 41-45, Targets can be used on either side of the vehicle. we recommend placing odd number
targets on left side of vehicle for consistancy. Targets 41 and 42, which are primarily used to measure ball joint locations,
must be used on the left and right side of the vehicle respectively. Targets 43 and 44, which are used to measure strut tower
locations, must be installed on the Lower Bar of the Upper Body Bar Assembly directly below their respective Pointers. Target
Number 45 must be in the center of the Lower Bar.
Figure
8
Figure
9
Target Base
Any Target except Targets numbered 43, 44 and 45 can be used with the Target Base. (See Figure 9.) Target Base sits on platform and
Target is projected upward from it to a reference point. When using Target Base to project a Target to a specific reference point, the
Target Pendant requires the addition of a Cone Attachment (see Figure 9) to compensate for absence of an attachment or clip. Targets
41 and 42 are used with the Target Base to make comparison measurements of ball joint locations.
Cone
Attachment
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...