18
Target No. 45
To install Upper Body Bar, attach one of the Vertical Scales to Upper Bar and place assembly’s point- ers on reference points. (See Fig-
ure 24.) Then tighten Pointer Housings (see Figure 25); however, if a reference point appears to be misaligned, do not tighten its Pointer
Housing. Next, install Lower Bar (with three Targets installed) and remaining Vertical Scale. If needed, adjust height of Lower Bar to
enable Body Scanner to view all three Targets.
IMPORTANT:
1) Target Number 45 must be in center of Lower Bar and Target Numbers 43 and 44 must be under their respective Pointers. (See Figure
26.)
2) Body Scanner’s Lasers should strike near center of Target faces.
3) Length of Vertical Scales must be equal, one side of vehicle to the other.
Figure
24 Figure
25
Figure
26
Summary of Contents for LASER LOCK
Page 43: ...43 Notes ...
