Chicago Pneumatic CPS 750, Instruction Manual, Page: 57 / 94

Instruction Manual
1310 3012 02 57
CPS
4.9.1 GENCOOL EG
GENCOOL EG is the only coolant that has been tested and approved by all engine manufacturers
currently in use in Chicago Pneumatic compressors and generators.
Chicago Pneumatic's GENCOOL EG extended life coolant is the new range of organic coolants purpose
designed to meet the needs of modern engines. GENCOOL EG can help prevent leaks caused by
corrosion. GENCOOL EG is also fully compatible with all sealants and gasket types developed to join
different materials used within an engine.
GENCOOL EG is a ready to use Ethylene Glycol based coolant, premixed in an optimum 50/50 dilution
ratio, for antifreeze protection guaranteed to -40°C (-40°F).
Because GENCOOL EG inhibits corrosion, deposit formation is minimized. This effectively eliminates the
problem of restricted flow through the engine coolant ducts and the radiator, minimizing the risk for engine
overheating and possible failure.
It reduces water pump seal wear and has excellent stability when subjected to sustained high operating
temperatures.
GENCOOL EG is free of nitride and amines to protect your health and the environment. Longer service
life reduces the amount of coolant produced and needing disposal to minimise environmental impact.
GENCOOL EG
To ensure protection against corrosion, cavitation and formation of deposits, the concentration of the
additives in the coolant must be kept between certain limits, as stated by the manufacturer's guidelines.
Topping up the coolant with water only, changes the concentration and is therefore not allowed.
Liquid-cooled engines are factory-filled with this type of coolant mixture.
GENCOOL EG Concentrate
Liter US gal Imp gal cu.ft Order number
can 5 1.3 1.1 0.175 1626 2255 00
can 20 5.3 4.4 0.7 1626 2256 00
Liter US gal Imp gal cu.ft Order number
can 5 1.3 1.1 0.175 1626 2257 00