Chicago Pneumatic CPS 750, Instruction Manual, Page: 42 / 94

CPS 750
42 1310 3012 02
CPS
A starting attempt will last 60 seconds max.
During the starting procedure the display will show:
If the engine failed to start after 5 attempts the display will show:
Switch the “ON/OFF” switch to the position “OFF” and to “ON” again to make another 10 starting
attempts.
3.3.5 Warming up
After starting the air receiver pressure will be approx 2 bar (29 psi). The engine will enter the warmup
status before the compressor can be loaded. If the button “LOAD” has been pressed during the warm-up
status, the engine will first warm-up before switching to load.
To cool down the starting motor, the system will wait 1 minute max. before
undertaking the next attempt, meanwhile do not leave the compressor.
Press the button “0” to prevent the system from undertaking any starting attempts
after the first or second starting attempt.