Chicago Pneumatic CPS 750, Instruction Manual, Page: 17 / 94

Instruction Manual
1310 3012 02 17
CPS
Pressure vessels (according to directive 87/404/EEC annex II § 2)
Maintenance/installation requirements:
1 The vessel can be used as pressure vessel or as separator and is designed to hold compressed air
for the following application:
•
pressure vessel for compressor,
•
medium AIR/OIL,
•
and operates as detailed on the data plate of the vessel:
•
the maximum working pressure ps in bar(psi),
•
the maximum working temperature Tmax in °C (°F),
•
the minimum working temperature Tmin in °C (°F),
•
the capacity of the vessel V in l (US gal, Imp gal, cu.ft.)
2 The pressure vessel is only to be used for the applications as specified above and in accordance with
the technical specifications. Safety reasons prohibit any other applications.
3 National legislation requirements with respect to re-inspection must be complied with.
4 No welding or heat treatment of any kind is permitted to those vessel walls which are exposed to
pressure.
5 The vessel is provided and may only be used with the required safety equipment such as manometer,
overpressure control devices, safety valve, etc.
6 Draining of condensate shall be performed regularly when vessel is in use.
7 Installation, design and connections should not be changed.
8 Bolts of cover and flanges may not be used for extra fixation.
Safety valves
All adjustments or repairs are to be done by an authorized representative of the valve supplier (see
4.5 Preventive maintenance schedule for the compressor ).