Chicago Pneumatic CPS 750, Instruction Manual, Page: 10 / 94

CPS 750
10 1310 3012 02
CPS
Skill level 2: Mechanical technician
A mechanical technician is trained to operate the unit the same as the operator. In addition, the
mechanical technician is also trained to perform maintenance and repair, as described in the instruction
manual, and is allowed to change settings of the control and safety system. A mechanical technician
does not work on live electrical components.
Skill level 3: Electrical technician
An electrical technician is trained and has the same qualifications as both the operator and the
mechanical technician. In addition, the electrical technician may carry out electrical repairs within the
various enclosures of the unit. This includes work on live electrical components.
Skill level 4: Specialist from the manufacturer
This is a skilled specialist sent by the manufacturer or its agent to perform complex repairs or
modifications to the equipment.
In general it is recommended that not more than two people operate the unit, more operators could lead
to unsafe operating conditions. Take necessary steps to keep unauthorized persons away from the unit
and eliminate all possible sources of danger at the unit.
When handling, operating, overhauling and/or performing maintenance or repair on Chicago Pneumatic
equipment, the mechanics are expected to use safe engineering practices and to observe all relevant
local safety requirements and ordinances. The following list is a reminder of special safety directives and
precautions mainly applicable to Chicago Pneumatic equipment.
These safety precautions apply to machinery processing or consuming air. Processing of any other gas
requires additional safety precautions typical to the application and are not included herein.
Neglecting the safety precautions may endanger people as well as environment and machinery:
•
endanger people due to electrical, mechanical or chemical influences,
•
endanger the environment due to leakage of oil, solvents or other substances,
•
endanger the machinery due to function failures.
All responsibility for any damage or injury resulting from neglecting these precautions or by non-
observance of ordinary caution and due care required in handling, operating, maintenance or repair, also
if not expressly mentioned in this instruction manual, is disclaimed by Chicago Pneumatic.
The manufacturer does not accept any liability for any damage arising from the use of non-original parts
and for modifications, additions or conversions made without the manufacturer’s approval in writing.
If any statement in this manual does not comply with local legislation, the stricter of the two shall be
applied.
Statements in these safety precautions should not be interpreted as suggestions, recommendations or
inducements that it should be used in violation of any applicable laws or regulations.
1.2 General safety precautions
1 The owner is responsible for maintaining the unit in a safe operating condition. Unit parts and
accessories must be replaced if missing or unsuitable for safe operation.