Chevrolet Volt 2017 Page 55 Owner'S Manual Download | Manualshive

Page: 55 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

54

Seats and Restraints

3. Push and pull on the seatback

to make sure it is locked.

To return the seatback to the upright
position:

1. Lift the lever fully without

applying pressure to the
seatback, and the seatback
returns to the upright position.

2. Push and pull on the seatback

to make sure it is locked.

Do not have a seatback reclined if
the vehicle is moving.

Heated Front Seats

{

Warning

If you cannot feel temperature
change or pain to the skin, the
seat heater may cause burns. To
reduce the risk of burns, people
with such a condition should use
care when using the seat heater,
especially for long periods of
time. Do not place anything on
the seat that insulates against
heat, such as a blanket, cushion,
cover, or similar item. This may
cause the seat heater to
overheat. An overheated seat
heater may cause a burn or may
damage the seat.

If available, the controls are on the
center stack. To operate, the vehicle
must be on.

Press

L

or

M

to heat the driver or

passenger seat.

Press the button once for the
highest setting. With each press of
the button, the heated seat will
change to the next lower setting,
and then the off setting. Three lights
indicate the highest setting and one
light the lowest.

«
...
53
54
55
56
57
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: UltraGauge Pages: 55

Brand: Acura Pages: 2

PRIME DESIGN VRR-E-PM21

Brand: Safe Fleet Pages: 12

Brand: Ecco Pages: 12

Brand: Westin Pages: 3

Brand: Bestop Pages: 31

Brand: Power Acoustik Pages: 4

Brand: r.LiNK Pages: 21

OPTIA hybrid 2020

Brand: Kia Pages: 54

Brand: v.link Pages: 19

Brand: ORA Pages: 7

Brand: Buick Pages: 161

Brand: Fabbri Pages: 32

Brand: Whelen Engineering Company Pages: 2

Brand: Curt Manufacturing Pages: 4

Brand: Menabo Pages: 4

Brand: RAWLINK Pages: 25

Prime Design AAL-8003

Brand: Safe Fleet Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands