Chevrolet Volt 2017 Page 196 Owner'S Manual Download | Manualshive

Page: 196 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Driving and Operating

195

4. Remove foot from the

accelerator pedal.

The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See

.

Resuming a Set Speed

If the cruise control is set at a
desired speed and then the brakes
are applied or

*

is pressed, the

cruise control is disengaged without
erasing the set speed from memory.

Once the vehicle speed reaches
about 40 km/h (25 mph) or more,
briefly press +RES. The vehicle
returns to the previous set speed.

Increasing Speed While Using
Cruise Control

If the cruise control system is
already activated:

.

Press and hold +RES on the
steering wheel until the vehicle
accelerates to the desired
speed, then release it.

.

To increase the speed in small
increments, briefly press +RES.
For each press, the vehicle goes
about 1 km/h (1 mph) faster.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster

The increment value used depends
on the units displayed.

Reducing Speed While Using
Cruise Control

If the cruise control system is
already activated:

.

Press and hold -SET until the
desired lower speed is reached,
then release it.

.

To slow down in small
increments, briefly press -SET.
For each press, the vehicle goes
about 1 km/h (1 mph) slower.

The speedometer reading can be
displayed in either English or metric
units. See

Instrument Cluster

The increment value used depends
on the units displayed.

Passing Another Vehicle While
Using Cruise Control

Use the accelerator pedal to
increase the vehicle speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previous set cruise speed. While
pressing the accelerator pedal or
shortly following the release to
override cruise control, briefly
pressing -SET will result in cruise
control set to the current vehicle
speed.

Using Cruise Control on Hills

How well the cruise control works
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal to maintain the
vehicle speed. When going
downhill, you might have to brake or
shift to a lower gear to keep your
speed down.

If a lower gear is being used while
going downhill, this causes the
vehicle to have improved control of
vehicle speed by using a
combination of engine and

«
...
194
195
196
197
198
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: GMC Pages: 140

Brand: VEAP SHIELD UNITED Pages: 3

Green Motion Building

Brand: Eaton Pages: 12

PRIME DESIGN VRI3-E-PM11

Brand: Safe Fleet Pages: 12

FleetMaster Air FW8 Series

Brand: SAF-HOLLAND Pages: 20

Brand: Suzuki Pages: 353

Brand: Torklift Pages: 16

Brand: Metra Electronics Pages: 2

Brand: Globalsat Pages: 2

STEALTH POWER RBP-216-SP

Brand: RBP Pages: 16

STREET SUPER SHIFTER

Brand: HURST Pages: 2

Brand: AC Schnitzer Pages: 16

LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...

Brand: Dakota Digital Pages: 3

Brand: Simplicity Pages: 10

Sprinter Side Ladder

Brand: FVC Pages: 8

2007 SLR Mclaren

Brand: Mercedes-Benz Pages: 425

Brand: Cadillac Pages: 20

Brand: Pyle Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands