Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 114 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Instruments and Controls

113

Mountain Mode Light

This light comes on when Mountain
Mode is selected. See

“

Mountain

Mode

”

in

Driver Selected Operating

for more information.

Hold Mode Light

This light comes on when Hold
Mode is selected. See

“

Hold Mode

”

in

Driver Selected Operating Modes

for more information.

Lane Keep Assist (LKA)
Light

This light is green if LKA is available
to assist.

LKA may assist by gently turning
the steering wheel if the vehicle
approaches a detected lane marking
without using the turn signal in that
direction. The LKA light will turn
amber.

This light is amber and flashes as a
Lane Departure Warning (LDW)
alert, to indicate that the lane
marking has been crossed.

See

Lane Keep Assist (LKA)

.

Vehicle Ahead Indicator

If equipped, this indicator will
display green when a vehicle is
detected ahead and amber when
you are following a vehicle ahead
much too closely.

See

Forward Collision Alert (FCA)

.

Traction Off Light

This light comes on briefly while
starting the engine. If it does not,
have the vehicle serviced by your

«
...
112
113
114
115
116
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Acdeos Pages: 38

Brand: Jeep Pages: 42

Brand: Jeep Pages: 44

Brand: Cadillac Pages: 20

Brand: Jeep Pages: 7

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 354

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 10

2013 Escalade ESV

Brand: Cadillac Pages: 524

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Cadillac Pages: 450

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

Brand: Cadillac Pages: 78

Brand: Cadillac Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands