Chevrolet Volt 2017 Owner'S Manual Download

Page: 194 / 376

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Driving and Operating

193

Drive the vehicle. If

comes on

and stays on, the vehicle may need
more time to diagnose the problem.
If the condition persists, see your
dealer.

Turning the Systems Off
and On

Caution

Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.

To turn off only TCS, press and
release

. The Traction Off light

displays in the instrument cluster.
The appropriate DIC message is
displayed. See

Ride Control System

Messages

138

. To turn TCS on

again, press and release

. The

Traction Off light

displayed in the

instrument cluster will turn off.

To turn off both TCS and StabiliTrak,
press and hold

until the Traction

Off light

and StabiliTrak Off light

come on and stay on in the

instrument cluster. The appropriate
DIC message is displayed. See

Ride Control System Messages

138

. To turn TCS and StabiliTrak

on again, press and release

. The

Traction Off light

and StabiliTrak

Off light

in the instrument cluster

turn off.

Adding accessories can affect the
vehicle performance. See

Accessories and
Modifications

237

Driver Mode Control

There are four operating modes that
can be selected while driving in
Electric or Extended Range Mode.
The four modes are Normal, Sport,
Mountain, and Hold.

Pressing MODE will display the
selectable drive modes in the Driver
Information Center (DIC). See

Driver Selected Operating Modes

181

for information on mode

operation.

Summary of Contents for Volt 2017

























































































































































































































































































































































































Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands

Chevrolet Volt 2017, Owner'S Manual

Search results

Summary of Contents for Volt 2017

Reviews:

Related manuals for Volt 2017

Brands by name

Popular brands