Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 91 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

90

Seats and Restraints

Securing Child Restraints
(With the Safety Belt in
the Front Seat)

This vehicle has airbags. A rear
seat is a safer place to secure a
forward-facing child restraint. See

Where to Put the Restraint

.

In addition, the vehicle has a
passenger sensing system which is
designed to turn off the front
outboard passenger frontal airbag
and passenger knee airbag under
certain conditions. See

Sensing System

and

Passenger Airbag Status Indicator

for more information,

including important safety
information.

Never put a rear-facing child seat in
the front. This is because the risk to
the rear-facing child is so great,
if the airbag deploys.

{

Warning

A child in a rear-facing child
restraint can be seriously injured
or killed if the front outboard
passenger frontal airbag inflates.
This is because the back of the
rear-facing child restraint would
be very close to the inflating
airbag. A child in a forward-facing
child restraint can be seriously
injured or killed if the front
outboard passenger frontal airbag
inflates and the passenger seat is
in a forward position.

Even if the passenger sensing
system has turned off the front
outboard passenger airbag(s), no
system is fail-safe. No one can
guarantee that an airbag will not
inflate under some unusual
circumstance, even though the
airbag(s) are off.

Secure rear-facing child restraints
in a rear seat, even if the
airbag(s) are off. If you secure a

(Continued)

Warning (Continued)

forward-facing child restraint in
the front outboard passenger
seat, always move the seat as far
back as it will go. It is better to
secure the child restraint in a
rear seat.

See

Passenger Sensing System

for additional information.

If the child restraint uses a top
tether, see

Lower Anchors and

Tethers for Children (LATCH
System)

for top tether anchor

locations.

Do not secure a child seat in a
position without a top tether anchor
if a national or local law requires
that the top tether be anchored, or if
the instructions that come with the
child restraint say that the top strap
must be anchored.

In Canada, the law requires that
forward-facing child restraints have
a top tether, and that the tether be
attached.

«
...
89
90
91
92
93
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Calix Pages: 5

Brand: Yakima Pages: 8

ANDROID INTERFACE

Brand: GMC Pages: 18

Brand: Prorack Pages: 15

Brand: kincrome Pages: 6

Intercooler Kit Type 31

Brand: GReddy Pages: 9

Brand: EZTRUNK Pages: 3

Brand: ideus Pages: 159

Brand: Guidosimplex Pages: 8

Brand: Rugged Ridge Pages: 3

PRIME DESIGN VRR3-FT21G-ST

Brand: Safe Fleet Pages: 12

2013 2500 Big Horn

Brand: RAM Pages: 12

Brand: Yakima Pages: 28

Brand: Master Tailgaters Pages: 10

Brand: Subaru Pages: 786

Brand: TrailFX Pages: 3

Brand: TigerTough Pages: 7

Brand: Ford Pages: 292

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands