Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 201 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

200

Driving and Operating

selected following gap. The vehicle
speed increases or decreases to
follow the vehicle in front of you, but
will not exceed the set speed. It may
apply limited braking, if necessary.
When braking is active, the brake
lamps will come on. The automatic
braking may feel or sound different
than if the brakes were applied
manually. This is normal.

Stationary or Very Slow-Moving
Objects

{

Warning

Adaptive Cruise Control (ACC)
may not detect and react to
stopped or slow-moving vehicles
ahead of you. For example, the
system may not brake for a
vehicle it has never detected
moving. This can occur in
stop-and-go traffic or when a
vehicle suddenly appears due to
a vehicle ahead changing lanes.
Your vehicle may not stop and
could cause a crash. Use caution
when using ACC. Your complete

(Continued)

Warning (Continued)

attention is always required while
driving and you should be ready
to take action and apply the
brakes.

ACC Automatically Disengages

ACC may automatically disengage
and the driver will need to manually
apply the brakes to slow the
vehicle when:

.

The sensors are blocked.

.

The Traction Control System
(TCS) or StabiliTrak system has
activated or been disabled.

.

No traffic or other objects are
being detected.

.

There is a fault in the system.

The ACC active indicator will not be
displayed when ACC is no longer
active.

Notification to Resume ACC

ACC will maintain a following gap
behind a detected vehicle and slow
your vehicle to a stop behind that
vehicle.

If the stopped vehicle ahead has
driven away and ACC has not
resumed, the vehicle ahead
indicator will flash as a reminder to
check traffic before proceeding. In
addition, three beeps will sound.
See

“

Go Notifier

”

in

“

Collision/

Detection Systems

”

under

Personalization

.

When the vehicle ahead drives
away, press +RES or the
accelerator pedal to resume ACC.
If stopped for more than
two minutes or if the driver door is
opened and the driver safety belt is
unbuckled, the ACC automatically
applies the Electric Parking Brake
(EPB) to hold the vehicle. The
Electric Parking Brake status light
will turn on. See

Electric Parking

. To release the EPB,

press the accelerator pedal.

«
...
199
200
201
202
203
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Jeep Pages: 6

Brand: Cargo Floor Pages: 16

Brand: Axxess Pages: 4

Brand: Vintage Air Pages: 14

Brand: Haibang Pages: 6

Transit Vancouver Wagon

Brand: Webasto Pages: 44

Brand: MAXWORKS Pages: 7

Car Cup Holder Phone Mount

Brand: UGREEN Pages: 9

Code Alarm PROFESSIONAL SERIES CA 5550SST

Brand: Audiovox Pages: 14

Brand: Kargo Master Pages: 19

PRIME DESIGN VBR3-FT31B

Brand: Safe Fleet Pages: 12

Park Vision VAL632210

Brand: Valeo Pages: 25

FOLDING TOP 1971

Brand: Fisher Body Pages: 37

Brand: Manik Pages: 2

Brand: FALCON RIDGE Pages: 4

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands