Chevrolet Volt 2017 Page 31 Owner'S Manual Download | Manualshive

Page: 31 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

30

Keys, Doors, and Windows

There is a key inside the Remote
Keyless Entry (RKE) transmitter that
can be used for all locks.

To remove the key, press the button
near the bottom of the RKE
transmitter, and pull the key out.
Never pull the key out without
pressing the button.

The key has a bar-coded key tag
that the dealer or qualified locksmith
can use to make new keys. Store
this information in a safe place, not
in the vehicle.

See your dealer if a replacement
key or an additional key is needed.

If it becomes difficult to turn the key
in a vehicle lock, inspect the key
blade for debris. Periodically clean
with a brush or pick.

If locked out of the vehicle, call
Roadside Assistance. See

Assistance Program

. With an

active OnStar subscription, an
OnStar Advisor may remotely
unlock the vehicle. See

.

Remote Keyless Entry
(RKE) System

See

Radio Frequency

.

If there is a decrease in the RKE
operating range:

.

Check the distance. The
transmitter may be too far from
the vehicle.

.

Check the location. Other
vehicles or objects may be
blocking the signal.

.

Check the transmitter's battery.
See

“

Battery Replacement

”

later

in this section.

.

If the transmitter is still not
working correctly, see your
dealer or a qualified technician
for service.

Remote Keyless Entry
(RKE) System Operation

The Keyless Access system allows
for vehicle entry when the
transmitter is within range. See

“

Keyless Access Operation

”

later in

this section.

The RKE transmitter functions may
work up to 60 m (197 ft) away from
the vehicle.

«
...
29
30
31
32
33
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

Cushman Turf Truckster

Brand: Jacobsen Pages: 210

Brand: Curt Manufacturing Pages: 6

Brand: ECS Electronics Pages: 16

Brand: Hama Pages: 75

signal mirror 2005-2009 Ford Mustang

Brand: muth Pages: 9

Parrot MKi + ParrotCK3100 range LOGAN

Brand: Parrot Pages: 10

2000 Oldsmobile Intrigue

Brand: Oldsmobile Pages: 348

Brand: v.link Pages: 21

PRIME DESIGN HXR-269-E-UM3-80

Brand: Safe Fleet Pages: 12

Brand: Honda Pages: 569

S90 - ACCESSORY PANEL

Brand: Volvo Pages: 166

2008 B2300 Truck

Brand: Mazda Pages: 280

Brand: OHIOSTEEL Pages: 2

Brand: Toyota Pages: 497

1500 CLASSIC 2020

Brand: RAM Pages: 360

Brand: Whispbar Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands