Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 310 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

Vehicle Care

309

2. Park both vehicles close

enough so that the jumper
cables can reach both vehicles'
positive (+) and negative (

−

)

terminals. The vehicles must
not touch each other. It could
cause an unwanted ground
connection that could damage
both vehicles' electrical
systems.

Put both vehicles in P (Park)
for an automatic transmission
or electric drive unit. For a
manual transmission, place the
vehicle in Neutral and set the
parking brake.

Caution

If any accessories are left on or
plugged in during the jump
starting procedure, they could be
damaged. The repairs would not
be covered by the vehicle
warranty. Whenever possible, turn
off or unplug all accessories on
either vehicle when jump starting.

3. Turn off both vehicles. Turn off

the radio, all lamps, and
accessories that are not
needed in both vehicles.
Unplug accessories from the
cigarette lighter or the
accessory power outlets. This
avoids sparks and helps save
both batteries and accessories.

4. Locate the positive (+) and

negative (

−

) terminals on the

vehicle with the run-down
battery.

5. Locate the positive (+) and

negative (

−

) battery terminals

on the Volt. The 12-volt battery
is under the load floor in the
rear cargo area. Open the
access covers for the
positive (+) terminal (1) and the
negative (

−

) terminal (2).

6. Check that the jumper cables

do not have loose or missing
insulation or a shock could
result and the vehicles could
be damaged.

Before connecting the jumper
cables, here are some basic
things to know. Positive (+)

jumper cable goes to
positive (+) battery terminal or
a remote positive (+) terminal if
available. Negative (

−

) jumper

cable goes to remote
negative (

−

) terminal if

available, or a heavy,
unpainted metal engine part or
a solid engine ground on the
vehicle with the run-down
battery.

Do not connect positive (+) to
negative (

−

) or there will be a

short that may damage the
battery or other parts of the
vehicle. Do not connect the
negative (

−

) cable to the

negative (

−

) terminal on the

run-down battery because this
can cause sparks.

Caution

If the jumper cables are
connected or removed in the
wrong order, electrical shorting
may occur and damage the
vehicle. The repairs would not be

(Continued)

«
...
308
309
310
311
312
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Harbor Freight Tools Pages: 4

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

21 COVERT Series

Brand: Code 3 Pages: 16

Brand: Axxess Pages: 4

Brand: Vintage Air Pages: 14

Brand: Whispbar Pages: 15

Brand: B-Speech Pages: 4

Brand: Whispbar Pages: 15

Brand: Ecco Pages: 12

Brand: RAM Pages: 496

Truck Training Model

Brand: WABCO Pages: 56

Brand: Buick Pages: 20

Brand: Brodit Pages: 2

Brand: Guidosimplex Pages: 8

RVS systems RVS-M641

Brand: Safe Fleet Pages: 24

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands