Chevrolet Volt 2017 Owner'S Manual Download | Manualshive

Page: 28 / 376

background image

Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

9807421) - 2017 - CRC - 11/18/15

In Brief

27

Less energy is used at low fan
speeds. When using the fan:

.

Fan Only is the most energy
efficient climate setting as long
as

0

is not selected.

.

Use eco for moderate air
conditioning and heater
operation. This is the next most
energy efficient setting as long
as

0

is not selected.

.

MAX provides the most comfort
but is the least energy efficient.

Use the auto heated seat feature
and the heated steering wheel
instead of climate settings. Heating
the seat and steering wheel uses
less energy than heating the vehicle
interior.

Use remote start to heat or cool the
interior when the vehicle is plugged
in to maximize the electric range by
utilizing electricity from the electrical
outlet.

Engine Assisted Heating,
if equipped, can be personalized
while plugged in. See

“

Engine

Assist Heat Plugged In

”

under

Vehicle Personalization

.

In hot weather, avoid parking in
direct sunlight or use sunshades
inside the vehicle.

Turn off the front and rear window
defog/defrost when they are no
longer needed.

Avoid driving with the windows open
at highway speeds.

Vehicle Charging/Maintenance

Charging

Keep the vehicle plugged in, even
when fully charged, to keep the
battery temperature ready for the
next drive. This is important when
outside temperatures are extremely
hot or cold.

Maintenance

Always keep the tires properly
inflated and the vehicle properly
aligned.

The weight of excess cargo in the
vehicle affects efficiency and range.
Avoid carrying more than is needed.

If fuel is not regularly used, consider
keeping the fuel tank only one-third
full. Excess fuel weight impacts
efficiency and range.

For fuel recommendations, see

Avoid unnecessary use of electrical
accessories. Power used for
functions other than propelling the
vehicle will reduce EV range.

Using a rooftop carrier will reduce
efficiency due to additional weight
and drag.

«
...
26
27
28
29
30
...
»

Summary of Contents for Volt 2017

























































































































































































































































































































































































Reviews:

No comments

Related manuals for Volt 2017

Brand: Jeep Pages: 42

Brand: Jeep Pages: 44

Brand: Cadillac Pages: 20

Brand: Jeep Pages: 7

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 354

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 10

2013 Escalade ESV

Brand: Cadillac Pages: 524

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Cadillac Pages: 450

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

Brand: Cadillac Pages: 78

Brand: Cadillac Pages: 8

Brand: Cadillac Pages: 113

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands