manualshive.com logo in svg

Chevrolet Silverado 2013, Owner'S Manual

The Chevrolet Silverado 2013 Owner's Manual is your go-to guide for understanding and operating this powerful and reliable truck. Available for free download, this comprehensive manual provides detailed instructions and helpful tips to enhance your Silverado experience. Visit manualshive.com now to access your digital copy and unleash the full potential of your vehicle.

Share
Download
background image

Black plate (24,1)

Chevrolet Silverado Owner Manual - 2013 - crc 1st edition - 4/5/12

9-24

Driving and Operating

Ignition Positions

The ignition switch has four different
positions.

To shift out of P (Park), the ignition
must be in ON/RUN or ACC/
ACCESSORY and the regular brake
pedal must be applied.

A (STOPPING THE ENGINE/
LOCK/OFF):

When the vehicle is

stopped, turn the ignition switch to
LOCK/OFF to turn the engine off.
Retained Accessory Power (RAP)

will remain active. See

Retained

Accessory Power (RAP) on
page 9

‑

28

for more information.

This position locks the ignition.
It also locks the transmission on
automatic transmission vehicles.
The key can be removed in
LOCK/OFF.

The steering can bind with the
wheels turned off center. If this
happens, move the steering wheel
from right to left while turning the
key to ACC/ACCESSORY. If this
doesn't work, then the vehicle needs
service.

Do not turn the engine off when the
vehicle is moving. This will cause a
loss of power assist in the brake
and steering systems and disable
the airbags.

If the vehicle must be shut off in an
emergency:

1. Brake using a firm and steady

pressure. Do not pump the
brakes repeatedly. This may
deplete power assist, requiring
increased brake pedal force.

2. Shift the vehicle to neutral. This

can be done while the vehicle is
moving. After shifting to neutral,
continue to firmly apply the
brakes and steer the vehicle to a
safe location.

3. Come to a complete stop. Shift

to P (Park) with an automatic
transmission, or Neutral with a
manual transmission. Turn the
ignition to LOCK/OFF.

4. Set the parking brake. See

Parking Brake on page 9

‑

54

.

Summary of Contents for Silverado 2013

































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Silverado 2013

Panasonic SL-SX451C Operating Instructions preview
SL-SX451C
Brand: Panasonic Pages: 2
Panasonic CYRC50U - UNIVERSAL REAR-VIEW CAMERA Manual De Instrucciones preview
CYRC50U - UNIVERSAL REAR-VIEW CAMERA
Brand: Panasonic Pages: 20
Panasonic CF-WEB Series Setting Manual preview
CF-WEB Series
Brand: Panasonic Pages: 12
RAM 2500 2020 Quick Reference Manual preview
2500 2020
Brand: RAM Pages: 20
Xblitz G250 User Manual preview
G250
Brand: Xblitz Pages: 16
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
BMW E39/2 Installation Instructions Manual preview
E39/2
Brand: BMW Pages: 21
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
Volvo M3602654 Installation Instructions Manual preview
M3602654
Brand: Volvo Pages: 10
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17
Yakima TopWater Quick Start Manual preview
TopWater
Brand: Yakima Pages: 9

Brands by name

Popular brands

Load more brands