Note:
If no trace of the original welds is present, follow the pattern specified for welding the rear rail to the cast rail section. Numbers represent
measurement in millimeters.
5.
Install the rear impact bar. Refer to
Rear Bumper Impact Bar Replacement
.
Note:
Recommend wire alloy is 5554 and wire size is 0.035. The shielding gas is 100
percent Argon.
A two minute cooling down period is recommended for every 2
minutes or 100
mm (4
in) of welding.
6.
Apply the sealers and anti-corrosion materials to the repair area. Refer to
Anti-Corrosion Treatment and Repair
.
7.
Paint the repair area. Refer to
Basecoat/Clearcoat Paint Systems
.
8.
Install all related panels and components.
9.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
10.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
