Note:
Recommended wire alloy is 5554 and wire size is 1
mm (0.035
in). The shielding gas is 100 percent Argon.
5.
Using a P-MIG welder, stitch weld the outer and lower rail duplicating the factory welds
(1).
6.
Using a P-MIG welder, stitch weld the rail on the inside duplicating the factory welds
(1).
Note:
Pre-Drill holes with 7/32 or 5.6
mm drill before installation of service screw. As noted from original part.
7.
Install the service screws in the floor panel bracket
(1).
