Note:
Avoid applying structural adhesive in the location of plug weld locations.
8.
Apply structural adhesive to the front floor panel.
9.
Plug weld the front floor panel in place.
10.
Apply structural adhesive and install the front floor panel extension
(1).
11.
Install the front floor panel. Refer to
Floor Panel Replacement
.
12.
Install the front impact bar. Refer to
Front Bumper Impact Bar Replacement
.
13.
Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to
Anti-Corrosion Treatment and Repair
.
14.
Paint the repair area. Refer to
Basecoat/Clearcoat Paint Systems
.
15.
Install all related panels and components.
16.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
17.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
