4.
Apply a bead of High Viscosity Urethane to the side structure and frame rail and to all areas originally bonded.
5.
Apply dollops of structural adhesive (1) to the original locations on the body side. Refer to
Sheet Molded Compound (SMC) Panel Bonding
.
6.
Install the door frame on the vehicle.
7.
Apply pressure to the door frame to set the adhesive.
8.
Clamp or tape the door frame in place as necessary.
9.
Remove any excess adhesive.
10.
Install all related panels and components.
11.
Connect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
12.
Enable the SIR system. Refer to
SIR Disabling and Enabling
.
