8.
Remove the floor panel from the vehicle.
9.
Save any and all brackets, mounting studs, and accessories for transfer to the new floor.
10.
Note the location and remove all remaining loose adhesive.
11.
Inspect the structure and frame rails for damage.
Installation Procedure
1.
Before applying adhesive dry fit the floor panel for proper fit and alignment.
Note:
DO NOT top coat any bonding surface. Use primer only on bonding surfaces. Refer to adhesive manufacturer's recommendations.
2.
Clean and prepare all bonding mating surfaces according to adhesive manufacturer's recommendations.
Note:
Keep adhesive away from seat studs to minimize squeeze out.
3.
Apply a consistent bead of bonding adhesive
(1) 10
mm (3/8
in) in diameter to the floor structure and frame rail to mate with the bonding surface of the
floor. Refer to
Sheet Molded Compound (SMC) Panel Bonding
.
